Great customer service from the first interaction to the final installation.
A dining room makeover often starts with a picture of how you want the finished space to look. New colours, furniture and decoration can make a big difference, but the position of the lighting matters too.
At a home on Camomile Way in Newton Abbot, the dining room had one central ceiling light. The customer wanted to replace it and add a second light position, ready for their planned makeover. We changed the arrangement from one central fitting to two new light fittings, giving them a lighting layout that better suits the room they are creating.
Why Change a Single Dining Room Light?
A single central light is common in dining rooms, but it does not always suit the way the space is used. If the dining table sits away from the centre of the room, the light may feel out of place. It can also become more noticeable when the room is redecorated and the customer starts planning where the table and other furniture will go.
For this customer, the timing made sense. They were getting the dining room ready for a makeover, so they wanted the lighting positions sorted before the finished look came together. That meant the new fittings could become part of the plan for the room, rather than an afterthought once everything else was complete.
Adding a second position also changes how the ceiling looks. Instead of drawing the eye to one fitting in the middle, two lights can give the room a more balanced arrangement. The result depends on the room and the fittings chosen, which is why it helps to think about lighting while planning the rest of the makeover.
Dining Room Lighting Work on Camomile Way, Newton Abbot
The existing dining room had one central light position. Our job was to replace that arrangement with two new light fittings, including the additional position the customer wanted.
Before fitting the lights, the important question was where they would work best in the finished room. Lighting positions are worth considering alongside the intended dining table location and the overall layout. A fitting can look right on an empty ceiling but feel awkward once the table is in place.
With the positions agreed, we carried out the electrical work needed for the new arrangement and installed the two fittings. The dining room now has both lights in place, ready for the customer to continue with their makeover.
It is a relatively small change compared with a full room renovation, but it is one that will be seen and used every day. Getting the positions right at this stage helps the new lighting feel like a deliberate part of the finished dining room.
Testing the New Lighting
After installation, we checked the connections and tested the altered lighting arrangement. We also confirmed that both fittings operated correctly before completing the work.
Electrical work involved in changing or adding a light position needs more than a quick check that the lamps turn on. The altered wiring and fittings should be checked so the customer can use the room with confidence as the makeover progresses.
Ready for the Dining Room Makeover
The customer started with one central dining room light and now has two new light fittings installed in their chosen positions. With the electrical work complete, they can plan the rest of the room around the new lighting.
This job on Camomile Way shows how useful it can be to deal with lighting early in a makeover. Once the room is decorated, changing ceiling light positions can mean disturbing finishes that have only just been completed. Planning ahead gives the customer more freedom to create the dining room they want.
If you are planning new dining room lighting and need an electrician in Newton Abbot, A.M Electrics Devon Ltd can help you review the existing position and install lighting suited to your plans. We are happy to help with small electrical jobsas well as larger projects.
Call 01626 299105 to discuss your dining room lighting.